PERFECT MOBILE SOLUTION

Mobile FLash File, Tools Tutorial Free Download,

Breaking

Thursday

HTC EYE M910n CHARGING & SPEAKER WAYS

HTC EYE M910n Charging Solution Jumper Problem Ways
HTC EYE M910n is its charging problem, and this is mainly because if your charging connector is giving you problems then sooner or later your phone is going to be out of charge hence rendering you completely helpless, therefore it is highly recommended that one should get it fixed as soon as one notices any such charging issues.In the following lines you will get to know about some of the charging problems related to HTC EYE M910n along with their solution.

Problem
HTC EYE M910n  is not charging at all.
Phone charges really very slow.
Phone does not give any response when charger is connected.


Reasons of Problems
Phone could be water damaged.
Dust particles might be present in charging connector.
Your HTC EYE M910n  charger might be faulty.
Connection in the phone might be broken.
Phone is encountered any physical damage.
Any of the capacitors might be faulty.
Charging IC might be faulty.





Workaround
If the charging is slow then all you have to do is to check with any other HTC EYE M910n charger, but you have to make sure that the charger is original, as slow charging issues almost always occurs with phones using 3rd party chargers.
Clean battery charging pins and check.
Clean charging connector pins.
.
Hardware Solution HTC EYE M910n Charging Problem
The very first thing that you need to do is to check voltage at the testing point 1 (as mentioned above in Figure). The voltage should be around 4.9V to 5V. other testing points are for USB connector.
After removing body of your HTC EYE M910n, the very first thing that you need to do is to re-solder first pin of charging connector and check.
Check the fuse and diode for possible open and short circuit.
If same problem Check Charging connector ways marked in below image.

No comments:

Post a Comment